Slides till roddmaskin

Artikelnr: CN-41801
Passar till A, B, C, D, E RowErgs

Ange dina uppgifter så kontaktar vi dig

BESTÄLLNINGSVARA

Varumärke Concept2

Beskrivning

Rodd på vattnet är en utpräglad lagsport, där det gäller att alla i båten gör lika, för att med gemensam kraft föra båten framåt.
Träning i roddergometer går att göra på liknande sätt, genom att ställa roddmaskinerna på "slides". Det är en ställning som gör att roddaren sitter nästan stilla och det är roddmaskinerna som flyttar sig!
Det är möjligt att koppla samman 2 eller flera roddmaskiner, för att på så sätt skapa en dubbel (trippel, fyra e.t.c) för att ro i lag.

Varför ro med slides?
Det främsta syftet är att du som tränar bättre ska fokusera på tekniken. Det går inte att en sitter och ror med ryckiga drag och en annan mer mjukt och följsamt. 
Dessutom gäller det att känna av hur de andra ror, precis som i en lagbåt.
Sedan är det ju roligt också!

Hur många slides behövs?
Det behövs två slides för att kunna ro flytande med en roddmaskin. För att koppla ihop roddmaskinerna behövs det alltid en slide mer än antalet roddmaskiner. Två roddmaskiner kräver således tre slides, fyra maskiner kräver fem slides o.s.v.

What are the dimensions and weight?
An unboxed single Slide is 24.25˝ x 56.25˝ x 3.5˝ (max. height). Each unboxed Slide weighs about 26 pounds. Box dimensions are 57˝ x 26.˝ Boxed weight is 57 pounds for a pair, 32 pounds for a single.
How much space is required? 
To use a pair of Slides with one indoor rower, we recommend a space of 11’ x 4’. To determine the space required for a multiple Slide setup, use this formula: (number of indoor rowers x 8.5 feet) + 3.5 feet = length required. Example: three indoor rowers x 8.5 feet plus 3.5
feet = 29 feet of floor space for three indoor rowers hooked together. Width is the same as the indoor rower. The indoor rower is raised about 2 1/2 inches off the floor.
Can the Slide be used with any model indoor rower? 
The Slide can be used with any model indoor rower, except the Dynamic Indoor Rower. The Model A and B may only be used on the Slide as a single unit or if the Model A and B is at the front of a line of Model C, D or E indoor rowers.
How do you set it up? 
Line up the Slides so they are level, close to parallel and with the correct distance between them. Once they are positioned correctly, the indoor rower(s) is simply placed on top of the Slides.
Is assembly required? 
No, the Slides are fully assembled and ready to use out of the box. No tools or modifications to the indoor rower are required.
Is maintenance required? 
The Slide is virtually maintenance-free. The shock cord may need to be adjusted and the plastic tracks should be cleaned as needed.
What about spare parts? 
Slide parts, ie. the plastic track, shock cord and rollers, may become worn only after a very long period of use. These are not parts that need regular replacement. If you do find that you need Slide parts, we carry a complete inventory.
What is the material? 
The frame and carriage are welded steel construction which are painted with a baked, electrostatically applied epoxy powder paint. The rollers and plastic track are filled nylon.
The rollers run on ABEC-1 grade ball bearings. The feet are thermoplastic rubber. The shock cord has a polypropylene casing around a latex core.
Will I get better times on the Slide? 
Testing has shown that times for short distances, (ie. 500m), can be faster when rowed on Slides. Results may vary from individual to individual. We accept ranking submissions done on Slides, however, world records need to be done on stationary indoor rowers.

 

Produktspecifikation

Färg Svart
Längd 61.6 cm
Bredd 142.9 cm
Djup 8.9 cm
Vikt 12 kg